Polyimide Silicone Tape for PCB SMT Masking and Class H Electrical Insulation
1. Thermal and Dielectric Integrity in Automated SMT Lines
Wave soldering and lead-free reflow profiles expose circuit boards to thermal spikes exceeding 250°C. Under these conditions, substandard polyimide films either carbonize or suffer catastrophic adhesive silicone transfer onto gold finger contacts (ENIG), resulting in solder de-wetting and multi-thousand-dollar scrap rates.
Engineered with genuine DuPont Kapton-equivalent polyimide resin and imported polysiloxane adhesives, Hopelight’s polyimide silicone tape is formulated for zero ionic contamination (chloride/fluoride < 10 ppm). It withstands 260°C peak temperatures for 30 minutes without yellowing, degradation, or adhesive bleed-through.
![]()
2. Physical & Electrical Parameter Comparison (0.08mm Construction)
| Performance Indicator | Test Standard | Hopelight Technical Polyimide Tape | Commercial Grade PI Tape |
Total Nominal Thickness | ASTM D3652 | 0.08 mm (0.05mm Film + 0.03mm Glue) | 0.05 - 0.06 mm |
Thermal Endurance Rating | UL 510 / IEC | Class H (180°C continuous / 260°C peak) | Unrated (< 200°C peak) |
Dielectric Breakdown | ASTM D149 | ≥ 6,500V (at 0.08mm) | < 4,000V (Pin-hole defects) |
Volume Resistivity | ASTM D257 | ≥ 1.0 × 10¹⁴ Ω·cm | ~ 1.0 × 10¹² Ω·cm |
Peel Adhesion to Steel | ASTM D3330 | 22 - 28 oz/in (2.4 - 3.1 N/cm) | 12 - 35 oz/in (Unstable release) |
Flammability Rating | UL 94 | V-0 Compliant | Self-extinguishing (Uncertified) |
Ionic Contamination | Ion Chromat. | < 10 ppm (Cleanroom coated) | > 50 ppm |
3. Critical Sourcing Checklist for B2B Electronics Assembly
When evaluating polyimide tapes for aerospace, EV battery pack assembly, and high-frequency transformers, always demand full RoHS, REACH, and UL94 documentation. Hopelight’s dedicated slitting lines ensure razor-sharp edges without micro-fibrillations, mitigating edge tearing during high-speed robotic tape application.
Related Technical Guides:
For low-friction packaging and sealing surfaces, check our PTFE coated glass fabric adhesive tape overview.
Evaluating cost-effective masking below 200°C? Read our powder coating PET masking tape guide.
English
한국어
français
Deutsch
Español
italiano
русский
čeština
Polska
Svenska
magyar
Nederland