Notes for Use of Aluminum Foil Tape

Aluminum foil cloth is composed of aluminum foil conductive cloth and hot melt. A dense film is formed after compounding with special flame-retardant adhesives. The compounded aluminum foil has a smooth and flat surface, high light reflectivity, high tensile strength in vertical and horizontal directions, airtight, watertight, and good sealing performance. It has the characteristics of high shielding rate, strong material toughness and low price. It can effectively shield the electronic interference generated by any electronic product and equipment, and it is also a suitable material to replace conductive cloth.

The aluminum foil duct tape with aluminum foil cloth as the base material is an industrial tape. The use of high-quality pressure-sensitive adhesive not only has good adhesion, strong adhesion, anti-aging, but also has greatly improved thermal insulation performance, and has various widths and lengths.

Many industries are inseparable from aluminum foil tape. Next, I will share with you the precautions for using aluminum foil tape.

1. Before using aluminum foil tape, clean up all the substrates that need to be used to remove floating dust and stains. Generally, when it is used on electronic products, it should not be wiped with water or wet cloth, but should be cleaned with dry cloth or dry brush.

2. After cleaning, tear off the aluminum foil tape for operation. The aluminum foil tape uses high-quality pressure-sensitive adhesive, which is very sticky, so it is necessary to determine the location that needs to be connected, otherwise it will be very troublesome to tear it off again.

3. After sticking, use your fingers to repeatedly press the aluminum foil tape several times to make the adhesive layer fully play its role and the bonding is fast enough. There is excess glue overflowing from the edge of the tape, which can be carefully removed with a blade.

Products