Contact Us

The Role of Aluminum Foil Duct Tape and Precautions when Using It

Aluminum foil duct tape is a kind of tape and one of the main raw materials of the production plant. Although aluminum foil duct tape seems to be uncommon in life, in fact, it exists everywhere, such as in air conditioners, bridges, etc., and aluminum foil duct tapes will be used. Next, let's take a look at the role of aluminum foil duct tape.


Ⅰ. The introduction of aluminum foil duct tape


Aluminum foil duct tape is industrial tape. It uses high-quality pressure-sensitive adhesive, which not only has good viscosity, strong adhesion, and anti-aging but also greatly improves the thermal insulation performance. The specifications are (0.05mm-0.08mm) in various widths and lengths.


The aluminum foil duct tape is used for the joint bonding of all aluminum foil composite materials, the sealing of the puncture of the insulation nail, and the repair of the damaged part. Widely used in refrigerators, air conditioners, automobiles, petrochemicals, bridges, hotels, electronics, and other industries.


Ⅱ. The role of aluminum foil duct tape


The base material of adhesive aluminum tape is aluminum foil, and the adhesive layer uses high-quality pressure-sensitive adhesive. Aluminum foil has excellent thermal insulation performance. When used in electronic products, with great aluminum foil tape heat resistance, it can also effectively shield electromagnetic waves, isolate electromagnetic waves from harming the human body, and prevent unnecessary voltage and current from affecting the normal use of electronic products.


Aluminum foil duct tape is often used in various electronic products such as transformers, notebook computers, computers, mobile phones, PDPs, PDAs, LED monitors, copiers, etc., to exert its electromagnetic shielding function. And used outside the steam duct to avoid temperature loss.


The aluminum foil duct tape is made of polyester fiber, which is not prone to cracks and damage after repeated use or multiple bending. It can be easily wound and attached to the wire, and can also be cut into various specifications according to customer requirements.


Ⅲ. Precautions for the use of aluminum foil duct tape


1. Before using the aluminum foil tape with adhesive, clean the substrate to be used to remove the floating ash and stains. Generally, when used in electronic products, it should not be wiped with water or damp cloth but should be cleaned with a dry cloth or a dry brush.


2. After cleaning, tear off the aluminum foil duct tape for operation. The aluminum foil duct tape is made of high-quality pressure-sensitive adhesive, which is very sticky. Therefore, it is necessary to determine the position that needs to be connected, otherwise, it will be troublesome to tear it off again after sticking it crookedly.


3. After pasting, use your fingers to repeatedly press the aluminum foil duct tape several times, so that the adhesive layer can fully play its role and be firmly bonded. There is excess glue overflowing from the edge of the tape, which can be carefully removed with a blade.